Overview
-
The flow rate is 1.5 times that of earlier cartridges.
-
The fine particle removal performance is rated for a single pass operation, standing at the same level as that of earlier PSE cartridges.
-
Long service life (Filtering service life is 1.5 - 2 times.*1
-
Because the cartridge is the same size (φ70 mm) as earlier models, the housing does not requiring replacing.
- *1 The service life may vary with the conditions of use.
Features
High flow rate
The cartridge realizes a high flow rate equivalent to 1.5 times that of earlier (single (1-stage)) cartridges.
The dense inner layer peculiar to the PSE membrane ensures reliable retention of fine particles.
Long service life
Owing to an increased filtering area, the cartridge has a long service life that is 1.5 - 2 times that of earlier cartridges.*2
- *2 The filtering service life may vary with the conditions of use.
Main applications
Since the cartridge employs the PSE membrane that has been received a favorable reputation, it is best suited for the following lines that require a high flow rate and high retention performance.
-
Filtration of purified water for cleaning equipment, etc. in the manufacturing processes of large LCDs and 300 mm wafers
-
Filtration of chemicals for cleaning equipment, etc. in the manufacturing processes of large LCDs and 300 mm wafers
Specifications
Table of Performance Characteristics
|
Item |
Unit |
Performance |
Remarks |
|||
|---|---|---|---|---|---|---|
|
Pore size |
µm |
0.1 |
0.2 |
0.45 |
||
|
Size |
Length |
mm |
264 |
*3 |
||
|
Outer diameter |
mm |
70 |
|
|||
|
Maximum differential pressure |
25℃ |
MPa |
0.54 (Positive pressure) |
|
||
|
25℃ |
MPa |
0.34 (Negative pressure) |
|
|||
|
Heat resistance |
MAX℃ |
90 |
*4 |
|||
|
PH area to be used |
|
1 - 14 |
*5 |
|||
- *3 Please contact us if you need detailed dimensions.
- *4 Continuous operating temperature
- *5 In the case of using the cartridge for chemical fluid filtration, prior evaluation should be carried out under the planned conditions of use.
Material
|
Part name |
Material |
|---|---|
|
Guard |
Polypropylene |
|
Center core |
Polypropylene |
|
Support |
Polypropylene |
|
Membrane filter |
Polysulfone (Asymmetric membrane) |
|
O-ring |
EPDM (Silicon, Viton) |
|
|
Pore size |
|||
|---|---|---|---|---|
|
0.1 µm |
0.2 µm |
0.45 µm |
||
|
Package unit |
1 |
PSECM10LSPPW1 |
PSECM20LSPPW1 |
PSECM45LSPPW1 |
|
12 |
PSECM10LSPPW12 |
PSECM20LSPPW12 |
PSECM45LSPPW12 |
|
- * For details of the methods of use, refer to the instruction manual that comes with the product.
- * The product may be built to order, depending on the shape and/or size. For details, contact your sales agent.
- * Specifications are subject to change for improvement purposes without prior notice.
